Prodigy Audio

Prodigy Audio NB2800.1 2800 Watt Monoblock Amplifier

Name: Prodigy Audio NB2800.1 2800 Watt Monoblock Amplifier
Brand: Prodigy Audio
SKU: NB2800.1
Price: 527.99 USD
Availability: OutOfStock

$527.99 USD

~~$632.99 USD~~ $527.99 USD

Sale Sold out

Shipping calculated at checkout.

Prodigy Audio NB2800.1 2800 Watt Monoblock Amplifier

Sold by AudioSellerz.com

The Prodigy Audio NB2800.1 2800 Watt Monoblock Amplifier is a South Korea-built digital mono amplifier for higher-output daily bass systems, larger subwoofers, and multi-subwoofer builds that require strong power at 1 ohm.

At 14.4 volts, Prodigy rates the NB2800.1 at 800 watts x 1 at 4 ohms, 1,800 watts x 1 at 2 ohms, and 2,800 watts x 1 at 1 ohm. Two compatible amplifiers can be linked for a published 5,600 watts x 1 at 2 ohms when the full system is configured correctly.

Prodigy Audio Amplifier Specifications

Amplifier type: Digital monoblock
RMS output at 4 ohms: 800 watts x 1
RMS output at 2 ohms: 1,800 watts x 1
RMS output at 1 ohm: 2,800 watts x 1
Linked output: 5,600 watts x 1 at 2 ohms with two compatible amplifiers
Low-pass filter: 35 Hz to 250 Hz
Subsonic filter: 10 Hz to 50 Hz
Bass boost: 0 to 9 dB
Input sensitivity: 6 volts to 0.2 volts
Frequency response: 10 Hz to 270 Hz
Operating voltage: 9 to 15.5 volts
Listed fuse rating: 300 amps for one amplifier; 600 amps when linked
Dimensions: 13.38 inches long x 7.40 inches wide x 2.24 inches high
Cooling: High-mass aluminum heatsink, tall fins, and high-speed cooling fans
Included controller: Bass knob with clipping, temperature, and voltage monitoring
Protection: Thermal, high/low voltage, speaker short, and DC protection

Electrical Support and Subwoofer Matching Matter

A 2,800-watt monoblock needs more than a large number on the amplifier. Match the final subwoofer impedance, continuous power handling, enclosure, speaker wire, power and ground wire, fuse protection, battery reserve, alternator output, and voltage behavior under load.

Shop Prodigy Audio subwoofers, compare more Prodigy Audio amplifiers, and plan the installation with car audio amp kits and Big 3 electrical upgrade kits.

Helpful Amplifier Installation Guides

Before powering the system, read how to set amplifier gain for subs, mids, and highs, verify cable and fuse sizing with the car audio wire gauge and fuse guide, and build the power and signal paths with the car audio wiring diagram guide.

A clean ground and adequate charging support are essential. Use the car audio grounding guide and the step-by-step car audio electrical upgrade guide when planning the full installation.

Shop Prodigy Audio at Audio Sellerz

Browse the complete Prodigy Audio collection at Audio Sellerz or learn more about the brand in why Audio Sellerz partnered with Prodigy Audio.

Frequently Asked Questions

How should this amplifier be matched?

Use the continuous output at the actual final impedance, the connected speaker or subwoofer RMS rating, channel layout, crossover range, and minimum stable load. Do not match equipment from maximum-power numbers alone.

What wire and fuse should be used?

Start with the amplifier's published fuse rating, expected current demand, cable length, and wire material. The battery-side fuse must protect the power cable, and the ground cable should match the power path.

Does a compact amplifier need less electrical support?

No. Physical chassis size does not determine current demand. Wiring, battery reserve, alternator output, and voltage under load must support the amplifier's real power requirements.