Speaker Pods

Speaker Pods for Cars, Jeeps, UTVs & Slingshots

Sold by AudioSellerz.com

Shop speaker pods that let you put speakers and tweeters where the factory never planned for them. This collection includes universal 2-way pods for 4", 6.5" and 8" speakers, A-pillar tweeter pods, flat mount kick panel pods, dual 8" door pod enclosures and vehicle-specific pods for Jeep, Polaris RZR, Polaris Slingshot and Can-Am. Many are available empty or loaded with speakers already installed.

Shop 6.5" Speakers | Shop 8" Speakers | Shop Tweeters | Shop Full Range Speakers

Why Use Speaker Pods?

Factory speaker locations are usually small, shallow and pointed at your ankles. A good set of pods fixes that. They let you:

  • Run bigger speakers than the factory location allows
  • Aim mids and tweeters up toward the listener
  • Add mids and highs to vehicles that have no speaker spots at all
  • Keep up with a loud subwoofer system
  • Get sound in open vehicles like UTVs, Jeeps and Slingshots

Types of Speaker Pods

A-Pillar Pods and Tweeter Pods

A-pillar pods mount tweeters up high near the windshield, pointed toward the driver and passenger. That gets the highs off the floor and up where you can hear them. The DS18 universal A-pillar pod holds two 2.5" tweeters.

Kick Panel Pods

Kick panel pods mount down by your feet, angled up toward the seats. Flat mount kick panel pods for 6.5" and 8" speakers work on Jeeps, bikes, jet skis and anywhere you have a flat surface to mount to.

Door Pods

Door pods build a new speaker location into the door panel so you can run larger or more speakers than the factory door allows. The dual 8" flush mount door pod enclosures from GP Car Audio are a good example for builds that need a lot of midrange.

Universal 2-Way Pods

High density ABS universal pods hold a midrange speaker and a tweeter in one housing. We carry them for 4", 6.5" and 8" speakers, empty or loaded.

Overhead and Flat Mount Pods

Overhead flat mount pods hold two 6.5" speakers and work well on ATVs, UTVs, golf carts and boats where there is no door or dash to work with.

Empty Pods vs Loaded Pods

  • Empty pods: you pick the speakers and tweeters. Best when you already know what you want to run or want to match a specific amplifier.
  • Loaded pods: the speakers are already installed. Many powersports pods come loaded with water-resistant marine speakers and LED lighting, and some kits include an amplifier and install kit.

Speaker Pods by Size

  • 2.5" and 3.8" tweeter pods for A-pillars and kick panels
  • 4" pods for smaller spaces and dash builds
  • 6.5" speaker pods, the most common size for doors, kicks and UTVs
  • 8" speaker pods for more midrange output

Before you buy, check the speaker's mounting depth and cutout so it fits the pod. Browse 6.5" car speakers, 8" car speakers and car audio tweeters to fill them.

Speaker Pods for Jeeps, UTVs and Slingshots

Open vehicles are hard on factory audio. Wind, road noise and engine noise eat up anything weak. That is why so many powersports pods are built around water-resistant marine speakers with RGB or digital LED lighting.

This collection includes vehicle-specific pods for:

  • Jeep Wrangler JL, JLU and Gladiator JT dash pods
  • Polaris RZR and RZR Pro kick panel and rear pods
  • Polaris Slingshot kick panel, fender and headrest pods
  • Can-Am Maverick X3 kick panel, B-pillar and center console pods
  • Can-Am Spyder and Ryker flat mount pod packages

Install Tips for Speaker Pods

  • Mount pods solid so they do not rattle or flex at volume
  • Aim mids and tweeters toward the listening position
  • Seal around the speaker so it plays clean
  • Run speaker wire sized for the power going to it
  • Use a proper crossover or amp setting so mids are not getting deep bass
  • Power them with an amplifier that matches the speaker's RMS rating

Setting gains right matters with mids and highs. Read our guide to setting amp gain for subs, mids and highs before you turn it up.

Why Buy Speaker Pods From Audio Sellerz?

Audio Sellerz is run by real car audio people who build loud mids and highs, demo vehicles and daily drivers. If you are not sure which pod or speaker fits your vehicle, use the live chat on AudioSellerz.com and tell us what you drive and what you want it to do.

Speaker Pod FAQ

What are speaker pods?

Speaker pods are enclosures that hold a speaker or tweeter in a new mounting location, like the A-pillar, kick panel, door or roll bar.

Are speaker pods worth it?

Yes, when the factory locations are too small or aimed the wrong way. Pods let you run bigger speakers and point them at the listener.

What size speaker pods should I get?

6.5" is the most common size. 8" pods give more midrange output, and tweeter pods are used for highs up on the A-pillars or dash.

What is the difference between empty and loaded pods?

Empty pods come without speakers so you can choose your own. Loaded pods come with speakers already installed.

Do speaker pods need an amplifier?

Most do if you want real output. A factory radio does not have the power to drive larger midrange speakers loud and clean.

Can I use speaker pods on a UTV or Jeep?

Yes. Many pods in this collection are made for Jeeps, UTVs and Slingshots and use water-resistant marine speakers.

What are A-pillar pods?

A-pillar pods mount tweeters or small mids on the pillars next to the windshield so the highs are up high and aimed at the listener.

What are kick panel pods?

Kick panel pods mount low in the footwell, angled up toward the seats. They are a common way to add or upgrade front speakers.

Follow Audio Sellerz

Follow Audio Sellerz for mids and highs builds, speaker installs, demos and new car audio products:

Facebook | Instagram | TikTok | YouTube