Distribution Blocks

Car Audio Power Distribution Blocks

Sold by AudioSellerz.com

Shop car audio distribution blocks for splitting one big power or ground run into multiple amplifiers, batteries or circuits. This collection includes 1/0 gauge to 4 gauge blocks, 1/0 gauge to 1/0 gauge blocks, 4 gauge to 8 gauge blocks, fused ANL distribution holders and chrome plated distribution bars for larger battery banks.

Whether you are adding a second amplifier for mids and highs or building a full battery bank in the back of the car, a good power distribution block keeps the wiring clean, tight and easy to service.

Shop ANL Fuses | Shop Fuse Blocks | Shop 0 Gauge Wire | Shop 4 Gauge Wire

What Does a Distribution Block Do?

A distribution block takes one wire in and gives you several connection points out. In car audio that usually means one large power wire from the battery feeding two, three or four amplifiers in the trunk.

Instead of running a separate power wire from the battery for every amplifier, you run one properly sized cable and split it near the amps. The same idea works on the ground side and for tying batteries together.

Common reasons to use a distribution block:

  • Powering a subwoofer amp and a mids and highs amp from one run
  • Feeding multiple amplifiers in an amp rack
  • Connecting extra batteries in a battery bank
  • Stepping down from 1/0 gauge to 4 gauge or 8 gauge for smaller amps
  • Keeping a clean, organized install that is easy to work on later

Fused vs Unfused Distribution Blocks

This is the part that matters most. The fuse at the battery is sized to protect the main power wire. If you split that wire into smaller gauge wire, the main fuse may be too large to protect those smaller wires.

  • Fused distribution block: each output has its own fuse, so each smaller wire is protected. This is the right choice when you step down in wire size.
  • Unfused distribution block: no fuses on the outputs. Works when the outputs are the same size as the input and the main fuse protects all of them, or on the ground side.

Shop fused options like the ANL distribution fuse holder with 1/0 gauge in and three 4 gauge outputs, or browse the full ANL fuse and fuse holder collection. For help matching fuse size to wire size, read our car audio wire gauge chart and fuse guide.

Common Distribution Block Setups

1/0 Gauge In, 4 Gauge Out

One of the most common setups. A single 1/0 gauge run from the front feeds two, three or four amplifiers that each take 4 gauge wire. Sky High Car Audio and DS18 both make blocks for this.

1/0 Gauge In, 1/0 Gauge Out

Used when the amplifiers or batteries on the other end need full size cable too. Good for bigger amps, battery banks and builds that will keep growing.

Two 1/0 Gauge In, Four 1/0 Gauge Out

For larger systems running more than one big power run from the front, like the DS18 block with two 1/0 inputs and four 1/0 outputs.

4 Gauge In, 8 Gauge Out

A smaller block for lighter systems, like feeding several small amplifiers from one 4 gauge run.

Distribution Bars for Battery Banks

Chrome plated distribution bars give you a long row of 1/0 and 2/0 gauge connection points. They are made for battery banks and big amp racks where a lot of cable has to land in one place. We carry 7" and roughly 20" long versions in screw down and bolt down styles.

Power and Ground Distribution

Distribution blocks work on the ground side too. Some builders run one large ground to a block near the amps, while others ground each amplifier on its own. Either way, keep grounds short, clean, tight to bare metal and sized to match the power wire. Our car audio grounding guide covers what makes a good ground.

Distribution Blocks for Powersports

UTVs, side by sides, boats and bikes need power distribution too. The DS18 fuse holder power distribution block is built for powersports applications where space is tight and you still want each circuit protected.

Mounting Tips

  • Mount the block to a solid surface close to the amplifiers
  • Keep the positive side covered so nothing metal can touch it
  • Strip the wire clean and fully seat it before tightening
  • Tighten set screws firmly and check them again after a few weeks
  • Use the right fuse on each output when stepping down in wire size
  • Keep blocks away from anything that moves, like seat tracks

How to Choose the Right Distribution Block

  • How many amplifiers or batteries are you connecting?
  • What size wire is coming in?
  • What size wire is going out?
  • Do the outputs need their own fuses?
  • Is it for power, ground or a battery bank?
  • How much room do you have to mount it?

If you are building the whole electrical side at once, also look at Big 3 kits, amp wiring kits and lithium car audio batteries.

Why Buy Distribution Blocks From Audio Sellerz?

Audio Sellerz is run by real car audio people who wire multi amp systems, battery banks and high-output charging systems all the time. We would rather help you get the layout right than sell you parts that do not fit the plan. Use the live chat on AudioSellerz.com and tell us your amps, wire size and battery setup.

Distribution Block FAQ

What is a distribution block in car audio?

It is a block that splits one power or ground wire into several connection points so you can run multiple amplifiers or batteries from one cable.

Do I need a fused distribution block?

If you are going from a larger wire to smaller wire, yes. Each smaller wire should have its own fuse sized to protect it.

Can I use a distribution block for ground?

Yes. Distribution blocks can be used on the ground side as long as the ground connection to the vehicle is clean, solid and sized correctly.

What size distribution block do I need?

Match the input to your main power wire and the outputs to the wire size each amplifier needs.

Can I run two amps off one power wire?

Yes, as long as the main wire is large enough for the total current of both amps and each branch is protected correctly.

What is a distribution bar?

A distribution bar is a long block with many connection points, usually used for battery banks and large amp racks.

Where should I mount a distribution block?

Close to the amplifiers, on a solid surface, covered and away from moving parts.

Do I still need a fuse at the battery?

Yes. The main power wire always needs its own fuse near the battery, even if the distribution block is fused too.

Follow Audio Sellerz

Follow Audio Sellerz for amp installs, electrical builds, battery banks and new car audio products:

Facebook | Instagram | TikTok | YouTube