DS18
PRO-X 6X9" Mid-Range Bullet Loudspeaker | 200W RMS 8-Ohm
PRO-X 6X9" Mid-Range Bullet Loudspeaker | 200W RMS 8-Ohm
Couldn't load pickup availability
PRO-X 6X9" Mid-Range Bullet Loudspeaker | 200W RMS 8-Ohm
Sold by AudioSellerz.com
The DS18 PRO-X698BM is a 6x9" mid-range loudspeaker from the DS18 PRO line rated at 200W RMS with an 8 ohm design. Swapping in better speakers is one of the most noticeable upgrades you can make to any system.
DS18 Product Details
6x9” Mid-Range Loudspeaker With Bullet
DS18’s PRO-X698BM brings unparalleled clarity to your car audio experience. These speakers set the gold standard for 6x9 car speaker upgrades.
DS18’s PRO-X698BM has been engineered to deliver loud and powerful music without distortion. Its superior specs allow you to feel the intensity of a live concert from the comfort of your driver's seat. With an astounding 200W RMS power handling and a peak of 400W, you can push the limits of LOUD without sacrificing your quality.
The attention to detail in construction speaks volumes; non-pressed paper cones paired with cloth surrounds are carefully housed in a steel basket, finished with a glossy red that makes a statement before the sound even hits. The included grille not only adds protection but also matches the overall design perfectly. The design features a 1.5” / 38.6mm 8 ohm voice coil made from Kapton, capable of withstanding high temperatures, guaranteeing longevity and consistent performance during the longest sessions. With a mounting depth of 3.27”, this speaker is ready to drop in on a wide range of applications.
The PRO-X698BM features a high sensitivity of 96dB, allowing it to operate efficiently by converting power into clear, audible sound without a hint of distortion - even at extreme volume levels. With a frequency response spanning from 100Hz to 12.5KHz, every note is delivered with depth.
By choosing the PRO-X698BM, you're investing in years of distortion-free audio that makes every drive unforgettable.
Grille Included.
Setup Tips From Audio Sellerz
- Power it with an amplifier channel rated close to its 200W RMS at 8 ohms, then set the gain carefully instead of turning it all the way up.
- Use a high-pass filter so deep bass goes to the subwoofer. The speakers will play louder and cleaner without it.
- Pro audio mids work best with a proper crossover or DSP so each driver only plays the range it was built for.
Related DS18 Products
Other DS18 products worth a look for the same build:
- DS18 PRO-X 6X9" Mid-Range Loudspeaker with Bullet, 200W RMS 4-Ohm
- DS18 PRO-ZXI 6x9" Mid-Range Bullet Loudspeaker Neodymium/Ferrite Magnets, 300W RMS 4-Ohm
- DS18 PRO 6x9" Neodymium Full-Range Bullet Loudspeaker 250 Watts Rms 4-Ohm
- DS18 PRO 6x9" Slim Water-Resistant Mid-Range Loudspeaker, 250W RMS 2-Ohm
Helpful Audio Sellerz Links
Shop more 6x9" car speakers or browse the full DS18 collection.
For setup help, read full range vs mid range vs mid bass vs tweeters and car audio speaker tuning guide.
Follow Audio Sellerz
Stay connected with Audio Sellerz for car audio builds, product updates, installation tips, videos, giveaways, and new releases.
Follow Audio Sellerz on Facebook, Instagram, TikTok, and YouTube.
Share
