Sky High Car Audio SH-35FE 3.5" Loudspeaker with Carbon Fiber Cone (Pair)

Sky High Car Audio SH-35FE 3.5" Loudspeaker Carbon Fiber Cone 4 Ohm Pair
Sold by AudioSellerz.com.

The Sky High Car Audio SH-35FE 3.5" Loudspeaker Carbon Fiber Cone 4 Ohm Pair is built for customers who want clearer vocals, better upper midrange detail, and stronger front-stage sound from a compact speaker location. These 3.5" loudspeakers are a strong choice for dash speaker upgrades, A-pillar pods, custom speaker pods, tight factory locations, motorcycle audio, UTV audio, and car audio builds where space is limited but sound quality still matters.

This listing is sold as a pair and uses a 4 ohm configuration. The SH-35FE features a carbon fiber cone, carbon fiber dust cap, rubber surround, 1" voice coil, and ferrite magnet motor design. That makes it a compact speaker option for adding more detail and presence without needing the space required for larger 6.5" or 8" midrange speakers.

With an 80Hz-20KHz frequency response, 81 dB sensitivity, and Sky High’s recommended 180Hz high pass crossover, these speakers are best used as part of a properly tuned mids and highs setup. They should not be forced to play deep bass like a subwoofer or dedicated midbass driver.

If you are building the rest of your speaker setup, browse more midrange speakers for car audio, compare full range car audio speakers, or shop the full Sky High Car Audio collection.

Key Features:

• Sky High Car Audio SH-35FE 3.5" loudspeaker pair
• Carbon fiber cone
• Carbon fiber dust cap
• Rubber surround
• 1" voice coil with TIL former and CCAW winding
• Ferrite magnet motor design
• 4 ohm impedance
• 81 dB sensitivity
• 80Hz-20KHz frequency response
• Recommended 180Hz high pass crossover
• Compact 1.6" mounting depth
• Sold as a pair

Great For:

• Dash speaker upgrades
• A-pillar speaker pods
• Custom 3.5" speaker locations
• Front-stage sound upgrades
• Vocals and upper midrange clarity
• Motorcycle audio builds
• UTV and powersports audio systems
• Compact car audio speaker locations
• Daily driver audio systems
• Custom mids and highs setups

Product Details:

• Brand: Sky High Car Audio
• Model: SH-35FE
• Speaker Size: 3.5"
• Speaker Type: Loudspeaker
• Impedance: 4 ohm
• Sensitivity: 81 dB
• Frequency Response: 80Hz-20KHz
• Recommended High Pass Crossover: 180Hz
• Cone Material: Carbon fiber cone
• Dust Cap: Carbon fiber dust cap
• Surround: Rubber surround
• Voice Coil: 1" voice coil with TIL former and CCAW winding
• Motor: Ferrite magnet motor design
• Overall Diameter: 3.6"
• Front Mount Baffle Cutout: 3"
• Mounting Depth: 1.6"
• Quantity: Pair

Why Use a 3.5" Loudspeaker?

A 3.5" loudspeaker is useful when you need more detail from a small speaker location. Many vehicles have factory dash speaker spots, corner dash locations, small door locations, or tight panels where larger speakers will not fit without major custom work. The SH-35FE gives builders a compact speaker option that can help improve vocal clarity and front-stage detail.

These speakers are especially useful when a system already has strong bass but the front stage feels weak, distant, or buried. A properly installed and tuned 3.5" loudspeaker can help pull vocals and detail higher in the vehicle so the system sounds more balanced.

Carbon Fiber Cone Design:

The carbon fiber cone and carbon fiber dust cap help give the SH-35FE a lightweight, rigid speaker structure for compact speaker performance. In a small speaker, cone control matters because the speaker needs to stay clean while playing vocals, instruments, and upper midrange detail.

The rubber surround helps support daily use, while the ferrite magnet motor design and 1" voice coil give the speaker the foundation needed for a compact car audio loudspeaker build.

Build the Speaker System Correctly:

The SH-35FE should be installed with the right crossover settings, clean amplifier power, proper wiring, and a speaker location that matches the build. Sky High recommends a 180Hz high pass crossover, which helps protect the speaker from being forced to play too low.

For best results, pair these speakers with a properly matched 4 channel car audio amplifier, quality car audio speaker wire, and safe tuning. If you are still learning how crossover points, mids, highs, midbass, and tweeters work together, read the Audio Sellerz car audio speaker tuning guide.

Installation Notes:

Before ordering, check your speaker location, mounting depth, cutout size, dash clearance, pod clearance, wiring access, and panel fitment. The SH-35FE has a 3.6" overall diameter, 3" front mount baffle cutout, and 1.6" mounting depth, but every vehicle and custom install can be different.

Do not overpower these speakers with clipped signal or unsafe crossover settings. Small speakers can sound excellent when installed correctly, but they can fail early if they are forced to play too low, mounted poorly, or fed dirty power.

If you are wiring these into a full system, route the wire safely and keep it away from sharp metal, moving parts, heat, pinch points, airbags, window tracks, and factory harnesses. For more wiring help, read the car audio wire gauge and fuse guide.

Who Are These Speakers For?

• Customers upgrading factory 3.5" speaker locations
• Daily drivers needing clearer vocals
• Front-stage builds that need more detail
• A-pillar and dash speaker upgrades
• Motorcycle and powersports audio customers
• Custom pod builders
• Mids and highs systems where space is limited
• Customers wanting a compact carbon fiber cone loudspeaker pair

If your build needs better vocals, cleaner upper midrange detail, and a compact speaker pair that fits tight locations, the Sky High Car Audio SH-35FE 3.5" Loudspeaker Carbon Fiber Cone 4 Ohm Pair is a strong upgrade for the system.

Helpful Audio Sellerz Links:

Building the rest of your speaker setup? Shop more midrange speakers for car audio, compare full range car audio speakers, browse all car audio speakers, or match the system with a 4 channel amplifier.

For more help planning the system, read the car audio speaker tuning guide and the car audio wire gauge and fuse guide.

Dealer & Wholesale Accounts:

Dealers, shops, installers, builders, and resellers who want to sell Sky High Car Audio products or many other products Audio Sellerz offers can apply for a wholesale/dealer account through AudioResellerz.com.

Follow Audio Sellerz:

Stay connected with Audio Sellerz for car audio builds, product drops, install tips, demos, and behind-the-scenes content. Follow us on Facebook, Instagram, TikTok, and YouTube.