Ruthless Audio

Ruthless Audio 10000.1 – 10K Mono Block Competition Car Audio Amplifier

Name: Ruthless Audio 10000.1 – 10K Mono Block Competition Car Audio Amplifier
Brand: Ruthless Audio
Price: 1599.99 USD
Availability: InStock

$1,599.99 USD

Sale Sold out

Shipping calculated at checkout.

Ruthless Audio 10000.1 – 10K Mono Block Competition Car Audio Amplifier

Sold by AudioSellerz.com

The Ruthless Audio 10000.1 – 10K Mono Block Competition Car Audio Amplifier is a Ruthless Audio monoblock amplifier built for subwoofer systems that need the published RMS output and installation features listed below. It can fit applications ranging from compact daily bass systems to high-output demo and competition builds, depending on the exact model and the electrical support behind it.

Match the amplifier to the subwoofers' combined RMS power handling and final wired impedance. Then confirm power-wire size, fusing, grounds, battery reserve, alternator output, ventilation, and mounting space before ordering.

10000 Specifications

Amplifier type: High-output Class-D monoblock
RMS power at 1 ohm, 14.4 volts: 10,000 watts
RMS power at 2 ohms, 14.4 volts: 6,000 watts
RMS power at 4 ohms, 14.4 volts: 3,000 watts
Warranty: Manufacturer lists a one-year 0.5-ohm warranty subject to requirements
Power connections: Triple 1/0-gauge positive and triple 1/0-gauge ground inputs
Signal connections: Tiffany-style RCA inputs
Input sensitivity: 6 volts–0.2 volts
Frequency response: 10–250 Hz
Phase control: 0–180 degrees
Required fusing listed by manufacturer: Three fuses, up to 350 amps each, one per positive run, for warranty
Length: 32 1/8 inches
Width: 10 1/2 inches
Height: 2.75 inches

What This Ruthless Audio Amplifier Is For

This monoblock is intended for subwoofer duty. The right application depends on the number of subwoofers, voice-coil configuration, final load, enclosure, and available electrical support.

Match the Ruthless Monoblock to the Subwoofer System

Choose the amplifier around the subwoofer system's combined RMS power handling, voice-coil configuration, final wired impedance, enclosure, and intended use. A lower impedance is not automatically better; it increases current demand and heat and must remain within the exact amplifier and warranty requirements.

Shop Ruthless Audio Bass-System Products

Browse the full Ruthless Audio collection, compare more monoblock car audio amplifiers, or shop car audio subwoofers and subwoofer boxes and enclosures for the rest of the bass system.

Helpful Ruthless Amplifier and Electrical Guides

Use the Ruthless Audio amplifier selection guide, calculate the load with the amplifier and final-ohm-load guide, and set the input correctly with the amplifier gain guide.

High-output amplifiers also require correctly sized wiring, fusing, grounds, battery reserve, and charging support. Review the wire-gauge and fuse guide, grounding guide, step-by-step car audio electrical upgrade guide, and high-output alternator guide. Shop amplifier wiring kits, Big 3 upgrade kits, high-output alternators, and other car audio electrical products as needed.

Read the Ruthless Audio reliability guide and amplifier protect-mode troubleshooting guide before operating a large system at its limit.

Frequently Asked Questions

How should I choose the final impedance?

Use the number of subwoofers or speakers, their voice-coil or nominal impedance, and the series or parallel wiring plan. The final load must stay within the exact amplifier specifications and warranty conditions.

Does the amplifier include everything needed for installation?

No. Plan for suitable power and ground wire, fusing, signal cable, speaker wire, mounting hardware, battery and charging support, and any vehicle-specific integration parts.

What matters most for reliability?

Stable voltage, correct fusing, low-resistance grounds, properly sized conductors, safe impedance, adequate cooling, and a clean gain setting all matter.