DS18
PRO-X 10" Mid-Range Bullet Loudspeaker | 300W RMS 8-Ohm
PRO-X 10" Mid-Range Bullet Loudspeaker | 300W RMS 8-Ohm
Couldn't load pickup availability
PRO-X 10" Mid-Range Bullet Loudspeaker | 300W RMS 8-Ohm
Sold by AudioSellerz.com
The DS18 PRO-X10BM is a 10" mid-range loudspeaker from the DS18 PRO line rated at 300W RMS with an 8 ohm design. Coaxials and loudspeakers like this are where most systems start, because the speakers decide how clear the whole build sounds.
DS18 Product Details
DS18 PRO-X10BM 10” Mid-Range Loudspeaker with Bullet 300 Watts RMS 8-Ohm
Loud & Powerful Music, Without Distortion
With strong midrange and clear high frequencies, these speakers deliver a concert-like audio experience without any distortion. Even better, the 2” 8-ohms voice coil handles high heat temperatures without breaking a sweat so you can blast your favorite music on a regular basis for extended periods of time.
Order the DS18 PRO-X10BM today to own powerful midrange speakers that will last for years and give an amazing audio experience every time!
Blast Concert-Like Music for Years to Come!
The high 97dB sensitivity of the PRO-X10BM lets you crank up the volume without any sound distortion, while the 100Hz to 5KHz frequency provides richer and more accurate tones that any audiophile will immediately notice. These loudspeakers can also handle up to 300 Watts RMS, making it capable of handling consistent and heavy usage. Put this baby on max volume and enjoy extreme volume levels with crystal clarity!
Product Highlights
- 10” Midrange Loudspeaker with Bullet Dust Cap
- MAX Power Handling: 600 Watts
- RMS Power Handling: 300 Watts
- Frequency Response: 80Hz-5Khz
- Voice Coil Diameter: 2”
- Voice Coil Material: Kapton
- Impedance: 8-Ohms
- Sensitivity (1W/1M): 97dB
- Magnet Weight: 30 Oz
- Magnet Material: Ferrite
- Mounting Depth: 3.78”
Technical Details
| Model | PRO-X10BM |
| Type | Midrange Loudspeaker with Bullet |
| Size | 10" |
| RMS Power | 300W |
| MAX Power | 600W |
| Frequency Response | 80Hz-5KHz |
| Impedance | 8 Ohms |
| Sensitivity | 98dB |
| Materials | |
| Surround | Cloth Edge |
| Frame | Red Steel Basket |
| Cone | Non-Pressed Paper Cone |
| Magnet | Ferrite |
| Voice Coil Wire | KCCAW |
| Diameters | |
| Voice Coil Size | 2" |
| Magnet Size | 40 oz. |
| Mounting Depth | 3.78" (95mm) |
| Cut-Out Dimension | 9.05" (232mm) |
Setup Tips From Audio Sellerz
- Power it with an amplifier channel rated close to its 300W RMS at 8 ohms, then set the gain carefully instead of turning it all the way up.
- Use a high-pass filter so deep bass goes to the subwoofer. The speakers will play louder and cleaner without it.
- Pro audio mids work best with a proper crossover or DSP so each driver only plays the range it was built for.
Related DS18 Products
More DS18 gear that pairs well with it or is worth comparing:
- DS18 PRO-X 10" Mid-Range Loudspeaker 300 Watts Rms 8-Ohm
- DS18 PRO-X 10" Mid-Range Loudspeaker 300 Watts Rms 4-Ohm
- DS18 PRO-EXL108 10" Mid-Range Loudspeaker 1200 Watts 8-Ohm
- DS18 PRO-GM10 10" Mid-Range Loudspeaker 660 Watts 8-Ohm
Helpful Audio Sellerz Links
Shop more 10" car speakers or browse the full DS18 collection.
For setup help, read full range vs mid range vs mid bass vs tweeters and car audio speaker tuning guide.
Follow Audio Sellerz
Stay connected with Audio Sellerz for car audio builds, product updates, installation tips, videos, giveaways, and new releases.
Follow Audio Sellerz on Facebook, Instagram, TikTok, and YouTube.
Share
