DS18
PRO 6.5" Neodymium Water resistant Full-Range Loudspeaker 200 Watts Rms 2-Ohm
PRO 6.5" Neodymium Water resistant Full-Range Loudspeaker 200 Watts Rms 2-Ohm
Couldn't load pickup availability
PRO 6.5" Neodymium Water resistant Full-Range Loudspeaker 200 Watts Rms 2-Ohm
Sold by AudioSellerz.com
SKU: PRO-M6.2NEO
PRO 6.5" Neodymium Water resistant Full-Range Loudspeaker 200 Watts Rms 2-Ohm is a DS18 audio processor from DS18 built for system tuning, signal control, crossover setup, equalization, and cleaner full-system audio builds. This description helps shoppers looking for DS18 motorcycle audio, DS18 6.5 speakers, DS18 DSP, car audio processor, audio equalizer, digital sound processor, system tuning understand where it fits in a real audio system.
Audio Sellerz focuses on the full build, not just one part. Match this DS18 product with the right vehicle, mounting space, amplifier power, wiring, fuse protection, enclosure needs, and electrical support so the system plays cleaner, louder, and more reliably.
Audio Sellerz System Match Notes
- Use clean signal routing and proper tuning so the speakers, subwoofers, and amplifiers work together.
- For amplified audio systems, make sure the power wire, ground, fuse protection, and voltage support match the equipment.
- If you are building a complete DS18 setup, plan the speakers, subwoofers, amplifiers, wiring, and electrical support together before ordering.
DS18 PRO-M6.2NEO PRO 6.5" Water Resistant Neodymium Full-Range Loudspeaker 200 watts RMS-400 Watts MAX 2-Ohm
Motorcycle Audio enthusiasts demand the highest quality for their high-end speakers because of the open-air environment that they love to be in. Hard riding comes with rigorous vibration and that can damage your speakers. We at DS18 want our motorcycle lovers to feel confident in their speaker choice and not have to worry about moisture damage or vibration damage.
To battle these problems, we have developed an amazing new set of motorcycle speakers that are water resistant so if you get caught in the rain, you don have to worry about damage. We have also reinforced other vital parts to hold up to vibration better so you can ride hard and long in any kind of weather. The PRO M Neo series come in 6.5- and 8-inch variations to help you get the best sound possible.
These New neo variations are stronger and handle power more efficiently because of the Neodymium motor. This motor is much stronger than traditional motors and has a very high motor force and sensitivity, so it can produce loud and clear sound at a lower volume level. These new neo water resistant speakers come in 2 ohms loads so you can effectively draw more power for your amp and not have to worry about bridging amps or complicated wiring.
The PRO M6.2 NEO and PRO M8.2 NEO are the absolute best solution to having rugged and loud DS18 speakers in your motorcycle, or any other outdoor application that needs to be water resistant.
Highlights
- Rigid treated cone with very high sensitivity that is also water resistant all while producing some of the richest sound we have to offer.
- 2 ohms configuration. It will load your amp at its lowest impedance so you can squeeze every watt of power out.
- Neodymium magnet that not are only lighter and smaller, they help the speaker transfer wattage more efficiently for a louder overall sound.
Technical Details
|
Model: |
PRO-M6.2NEO |
|
Type: |
Mid Range Loudspeaker |
|
Size: |
6.5" |
|
RMS Power: |
200W |
|
MAX Power: |
400W |
|
Frequency Response: |
80Hz - 16KHz |
|
Impedance: |
2 Ohms |
|
Sensitivity: |
95dB |
|
Surround: |
Cloth Edge |
|
Frame: |
Aluminum |
|
Cone: |
Fiber Glass with Foam Composite Paper Cone |
|
Magnet: |
Neodymium |
|
Voice Coil Wire: |
KCCAW |
|
Voice Coil Size: |
1.5" |
|
Mounting Depth: |
2.95" (75mm) |
|
Cut-Out Dimension: |
5.7" (145mm) |
|
Overall Depth |
3.23"/(82mm) |
|
Overall Diameter |
6.8"/(174.5mm) |
|
Front Mount Baffle Cutout |
5.76"/(146.5mm) |
Follow Audio Sellerz
Follow Audio Sellerz for car audio builds, product drops, installs, demos, and behind-the-scenes content.
Share
