DS18
PRO 6.5" Neodymium Mid-Range Bullet Loudspeaker 250 Watts Rms 4-Ohm
PRO 6.5" Neodymium Mid-Range Bullet Loudspeaker 250 Watts Rms 4-Ohm
Couldn't load pickup availability
PRO 6.5" Neodymium Mid-Range Bullet Loudspeaker 250 Watts Rms 4-Ohm
Sold by AudioSellerz.com
The DS18 PRO-NEO6 is a 6.5" mid-range loudspeaker from the DS18 PRO line rated at 250W RMS with a 4 ohm design. It is built for clean, loud midrange and highs that cut through road noise.
DS18 Product Details
DS18 PRO-NEO6 6.5" Neodymium Mid-Range Loudspeaker with Bullet 500 Watts 4-Ohm
DS18 amassed a wealth of experience in manufacturing the most elegant neodymium midranges for those seeking simple perfection. Neodymium magnets provide a higher magnetic flux density in the air gap, which generates a much greater action force in the voice coil. For this reason, Neo magnets have the strongest permanent magnets of all the commercially available speakers. Ranging in sizes, mounting depths, and frequency responses, we have more than 10 different models of Neo midranges to accommodate any build.
Highlights
- High powered aluminum voice coil backed by an intense neodymium magnet for more volume at the highest efficiency on the market.
- Beautiful DS18 design including a DS18 Tooled aluminum brushed accented basket and high quality terminals.
- Silver Bullet Resonator (tweeter) that effectively widens the higher range of your NEO bringing you a fuller range of frequencies to blast.
Technical Details
| Model: | PRO-NEO6 |
| Type: | Midrange Loudspeaker |
| Size: | 6.5" |
| RMS Power: | 250W |
| MAX Power: | 500W |
| Frequency Response: | 160Hz - 12.5KHz |
| Impedance: | 4 Ohms |
| Sensitivity: | 96dB |
| Materials | |
| Surround: | Cloth Edge |
| Frame: | Heavy Duty Aluminum Basket |
| Cone Material: | Paper Cone |
| Magnet: | Neodymium |
| Voice Coil Wire: | KCCAW |
| Measurements | |
| Voice Coil Size: | 1.5" (38.6mm) |
| Magnet Size: | Neo 7.6 oz. (90 x 45 x 6) |
| Mounting Depth: | 2.79" (73mm) |
| Cut-Out Dimensions: | 5.85" (148.5mm) |
Setup Tips From Audio Sellerz
- Power it with an amplifier channel rated close to its 250W RMS at 4 ohms, then set the gain carefully instead of turning it all the way up.
- Use a high-pass filter so deep bass goes to the subwoofer. The speakers will play louder and cleaner without it.
- Pro audio mids work best with a proper crossover or DSP so each driver only plays the range it was built for.
Related DS18 Products
Compare it with similar DS18 options, or add matching gear:
- DS18 PRO 6.5" Slim Neodymium Mid-Range Loudspeaker with Bullet, 400W 4-Ohm
- DS18 PRO 6.5" Mid-Range Loudspeaker with Bullet, 140W RMS 4-Ohm
- DS18 PRO 6.5" Neodymium Mid-Range Loudspeaker 300 Watts Rms 4-Ohm
- DS18 PRO-X 6.5" Mid-Range Loudspeaker 250 Watts Rms 4-Ohm
Helpful Audio Sellerz Links
Shop more 6.5" car speakers or browse the full DS18 collection.
For setup help, read full range vs mid range vs mid bass vs tweeters and car audio speaker tuning guide.
Follow Audio Sellerz
Stay connected with Audio Sellerz for car audio builds, product updates, installation tips, videos, giveaways, and new releases.
Follow Audio Sellerz on Facebook, Instagram, TikTok, and YouTube.
Share
