DS18
DS18 GEN-X6000.1D Class D 1-Channel Monoblock Amplifier 6000 Watts
DS18 GEN-X6000.1D Class D 1-Channel Monoblock Amplifier 6000 Watts
Couldn't load pickup availability
DS18 GEN-X6000.1D Class D 1-Channel Monoblock Amplifier 6000 Watts
Sold by AudioSellerz.com
SKU: GEN-X6000.1D
DS18 GEN-X6000.1D Class D 1-Channel Monoblock Amplifier 6000 Watts is a DS18 amplifier from DS18 built for powering subwoofers, mids, highs, full-range speakers, motorcycles, marine systems, Jeeps, and powersports audio. This description helps shoppers looking for DS18 amp, DS18 amplifier, car audio amplifier, DS18 4 channel amp, monoblock amplifier understand where it fits in a real audio system.
Audio Sellerz focuses on the full build, not just one part. Match this DS18 product with the right vehicle, mounting space, amplifier power, wiring, fuse protection, enclosure needs, and electrical support so the system plays cleaner, louder, and more reliably.
Audio Sellerz System Match Notes
- Match the amplifier to the speaker or subwoofer RMS power, final ohm load, wire size, fuse protection, and vehicle electrical support.
- For amplified audio systems, make sure the power wire, ground, fuse protection, and voltage support match the equipment.
- If you are building a complete DS18 setup, plan the speakers, subwoofers, amplifiers, wiring, and electrical support together before ordering.
DS18 GEN-X6000.1D Class D 1-Channel Monoblock Amplifier 6000 Watts
The DS18 GEN-X line was developed with the customer in mind. We wanted to produce the sturdiest amplifier possible within a reasonable price range, and after months of R&D, we finally put together the most attractive design with top of the line internal technologies. All internal parts are manufactured by DS18.
With their lower power consumption and high efficiency, the GEN-X amplifiers can be installed without the need of a secondary or high-output alternator.
Highlights
- Lightweight design that retains very high durability with incorporated high efficiency heat sync.
- High quality circuit board to give the most power with a high efficiency rate.



Technical Details
- RMS Power @ 14.4VDC
-
Power at 4 Ohm 700W
-
Power at 2 Ohm 1200W
-
Power at 1 Ohm 2000W
- THD Distortion 0.08%
- Low Pass Filter: 40HZ 180Hz
- Bass Boost: 0dB to +12dB
- Subsonic: 17Hz - 50Hz
- Bass Frequency: 30Hz - 80Hz
- MOSFET Class D Monoblock Amplifier
- Dimensions (L x W x H): 380 x 190 x 60 mm
Follow Audio Sellerz
Follow Audio Sellerz for car audio builds, product drops, installs, demos, and behind-the-scenes content.
Share
