Trinity Audio Solutions Speakers

Sold by AudioSellerz.com

Shop Trinity Audio Solutions speakers at Audio Sellerz for loud daily drivers, custom door builds, mids and highs systems, pro audio style installations and complete car audio upgrades. Trinity offers speaker options designed to handle different parts of the music, including pro audio midrange speakers, horn-driven coaxial speakers and high-output super tweeters.

This collection is dedicated specifically to Trinity speakers. To browse the complete brand, including subwoofers, amplifiers and enclosures, visit the Trinity Audio Solutions collection at Audio Sellerz.

Trinity Pro Audio Speakers for Loud Car Audio Systems

Upgrading the speaker side of a car audio system is about more than simply making the music louder. The goal is to create enough clean midrange, vocal output, punch and high-frequency detail to balance the rest of the system.

This becomes especially important when a vehicle has a strong subwoofer stage. A powerful bass system can easily overpower weak factory speakers, leaving the system with plenty of low-frequency output but poor vocals and very little detail.

Trinity Audio Solutions offers speaker designs that can be used to build a stronger front stage and louder mids and highs system when properly matched with the amplifier, crossover settings and installation.

Trinity Midrange Speakers

Midrange speakers handle a large portion of what you actually hear in music. Vocals, guitars, snares, brass, piano and many other instruments depend heavily on the midrange portion of the system.

Trinity pro audio midrange speakers can be used in custom doors, speaker pods and other installations where stronger vocal output and projection are needed.

When shopping for mids, compare the exact speaker's:

  • Speaker size
  • RMS power handling
  • Impedance
  • Sensitivity
  • Frequency response
  • Mounting depth
  • Recommended crossover range
  • Available amplifier power

If you want to compare Trinity speakers with other dedicated mids, browse our car audio midrange speaker collection.

Trinity Horn-Driven Coaxial Speakers

Trinity also offers horn-driven pro audio coaxial speaker designs that combine midrange output and high-frequency reproduction into a single speaker assembly.

A coaxial design can be useful when you want strong mids and highs without installing a completely separate midrange and tweeter in every location.

These types of speakers can work well in:

  • Car and truck doors
  • Custom door panels
  • Speaker pods
  • Rear panels
  • Loud daily-driver systems
  • Demo-style builds
  • Other custom car audio installations

If you want to compare other speakers designed to cover a wider part of the music from one speaker location, browse our full range car audio speakers.

Trinity Super Tweeters

Tweeters handle the upper frequencies that provide detail, clarity and the top end of the music. In louder systems, high-output or super tweeters can help the highs stay present when strong midrange speakers and subwoofers are playing at higher levels.

Tweeters need to be matched and tuned carefully. Sending frequencies that are too low to a tweeter, using excessive amplifier gain or applying aggressive EQ can damage the speaker quickly.

Browse our complete car audio tweeter collection to compare Trinity super tweeters with other available high-frequency speaker options.

Midrange vs Midbass vs Tweeters

Each speaker should have a job.

  • Subwoofers handle the low bass.
  • Midbass speakers provide punch and body between the subwoofer and midrange sections.
  • Midrange speakers reproduce vocals, instruments and much of the main musical information.
  • Tweeters reproduce the upper frequencies and fine detail.
  • Full range and coaxial speakers can cover a wider portion of the music from one speaker location.

Trying to make every speaker play every frequency usually creates a system that becomes muddy, harsh or mechanically stressed.

For a deeper explanation of how the different speaker types should work together, read our car audio speaker tuning guide for full range speakers, midrange, midbass and tweeters.

Do You Need Midbass Speakers Too?

One of the most overlooked parts of a car audio system is midbass.

A system can have strong subwoofers, loud mids and plenty of tweeters but still sound thin if there is nothing providing the punch and body between the deep bass and the vocal range.

If your system needs more impact through the doors or front stage, browse our car audio midbass speakers.

Match Trinity Speakers With the Right Amplifier

Aftermarket speakers often perform best when they have clean amplifier power available. The amplifier should be chosen around the RMS power, impedance and number of speakers in the completed system.

If you want to keep the main equipment within the Trinity lineup, browse Trinity Audio Solutions amplifiers.

Do not choose an amplifier based only on the largest wattage number advertised. Compare RMS power at the impedance the speakers will actually present to the amplifier.

Be Careful When Wiring Multiple Speakers

Adding more speakers changes the load presented to the amplifier. Two or four matching speakers can create a different final impedance depending on whether they are wired in series, parallel or placed on separate amplifier channels.

Before connecting multiple mids, coaxials or tweeters to one amplifier channel, make sure the resulting load is safe for the amplifier.

More speakers do not automatically mean the system should simply be wired together on the same channel.

Set Amplifier Gain Correctly

Gain is not a volume control.

The amplifier gain should be used to match the amplifier input to the signal from the radio, line output converter or DSP. Excessive gain can push the amplifier into clipping and make mids and tweeters sound harsh long before the system actually sounds obviously distorted.

Once the system is installed, read our guide to setting amplifier gain for subs, mids and highs.

Use Crossovers to Protect Your Trinity Speakers

Crossovers are extremely important in a multi-speaker car audio system because they keep each speaker focused on the frequencies it is designed to reproduce.

For example:

  • Subwoofers should handle the low-frequency bass.
  • Midbass speakers should not be forced to reproduce deep subwoofer frequencies.
  • Midrange speakers should normally be protected from low bass.
  • Tweeters need protection from lower frequencies that can quickly damage them.

The correct crossover point depends on the exact speaker, power level, installation and complete system. Always check the requirements of the individual Trinity speaker before choosing crossover settings.

Tune the Complete Speaker System

A loud system does not have to sound harsh.

Good tuning is about balance. The subwoofer section, midbass, midrange and tweeters should work together instead of competing against one another.

A properly tuned system should have:

  • Strong bass without burying the vocals
  • Midbass that provides punch and impact
  • Midrange that keeps vocals clear and present
  • Highs that provide detail without becoming painful
  • Clean amplifier gain settings
  • Crossovers that protect each speaker
  • Balanced output between each section

Our complete car audio speaker tuning guide explains how to bring the different parts of a mids and highs system together.

Using a DSP With Trinity Speakers

A digital signal processor can provide additional control over a more advanced speaker system by allowing adjustments such as crossover points, equalization, time alignment and individual channel levels.

A DSP is especially useful when the system uses separate amplifiers and speaker sections or when you need more control than the radio and amplifier crossovers provide.

However, a DSP cannot fix bad wiring, incorrect amplifier gain or poorly chosen speakers. The basic system still needs to be installed and configured correctly first.

Learn more in our car audio DSP tuning guide.

Speaker Wire Matters

Do not forget the wiring between the amplifier and speakers.

Speaker wire needs to handle the power being sent to the speakers while making solid connections throughout the vehicle. This becomes increasingly important in larger door builds where multiple speakers may be installed several feet away from the amplifier.

Browse our car audio wire and installation wiring when planning the electrical and speaker wiring for your Trinity system.

Building a Complete Trinity Audio Solutions System

Trinity speakers can be combined with the rest of the Trinity lineup when building a complete system.

Trinity Audio Solutions Speaker FAQ

What type of speakers does Trinity Audio Solutions make?

Trinity Audio Solutions offers speaker options that include pro audio midrange speakers, horn-driven coaxial speakers and high-output super tweeters. Check the individual product listing for the specifications and intended application of each model.

Are Trinity speakers good for loud car audio systems?

Trinity offers pro audio style speaker options intended for customers building stronger mids and highs systems. The final output depends on the speakers, amplifier power, installation, crossover settings and tuning.

What is a pro audio midrange speaker?

A pro audio midrange speaker is designed primarily to reproduce the middle portion of the audio spectrum where vocals and many instruments are located. These speakers are commonly used in loud door builds and amplified mids and highs systems.

What is a horn-driven coaxial speaker?

A horn-driven coaxial design combines a larger speaker driver with a high-frequency horn in one assembly. This allows one speaker location to reproduce both midrange and high-frequency information.

Do Trinity speakers need an amplifier?

That depends on the exact speaker and system. Higher-output aftermarket and pro audio speakers are commonly paired with external amplifier power so they can perform as intended. Always match the amplifier to the RMS power and impedance of the exact speaker.

Can I run multiple Trinity speakers on one amplifier?

Yes, if the amplifier has enough appropriate channels or the speakers can be wired to a final impedance the amplifier safely supports. Calculate the completed load before wiring multiple speakers together.

Do I need tweeters with Trinity midrange speakers?

A dedicated midrange speaker normally focuses on the middle frequencies rather than reproducing the entire audio range. Depending on the system design, separate tweeters or another high-frequency speaker may be used to reproduce the upper frequencies.

How should I tune Trinity speakers?

Start with clean amplifier gain settings and use crossovers to keep each speaker within a frequency range it can safely reproduce. Then balance the midbass, midrange, tweeters and subwoofer section before making aggressive EQ adjustments.

Why Buy Trinity Audio Solutions Speakers from Audio Sellerz?

Audio Sellerz works with real car audio systems, from simple daily-driver upgrades to amplified doors, custom speaker installations, subwoofer systems and complete high-output builds.

We understand that speakers need to be chosen around more than diameter and wattage. The amplifier, impedance, crossover settings, installation, speaker placement and tuning all affect how the completed system performs.

Browse the Trinity speakers above or return to the main Trinity Audio Solutions collection to continue planning your system.

Follow Audio Sellerz

Follow Audio Sellerz for speaker installs, custom door builds, mids and highs systems, amplifier tuning, subwoofer builds, product releases and real car audio content.

Follow Audio Sellerz on Facebook
Follow Audio Sellerz on Instagram
Follow Audio Sellerz on TikTok
Subscribe to Audio Sellerz on YouTube