High Density Abs 2-Way Universal Pod 1 X 4" Loudspeaker and 1 X .5-1” Tweeter

High Density Abs 2-Way Universal Pod 1 X 4" Loudspeaker and 1 X .5-1” Tweeter

Sold by AudioSellerz.com

SKU: EN4P

High Density Abs 2-Way Universal Pod 1 X 4" Loudspeaker and 1 X .5-1” Tweeter is a DS18 audio processor from DS18 built for system tuning, signal control, crossover setup, equalization, and cleaner full-system audio builds. This description helps shoppers looking for DS18 DSP, car audio processor, audio equalizer, digital sound processor, system tuning understand where it fits in a real audio system.

Audio Sellerz focuses on the full build, not just one part. Match this DS18 product with the right vehicle, mounting space, amplifier power, wiring, fuse protection, enclosure needs, and electrical support so the system plays cleaner, louder, and more reliably.

Audio Sellerz System Match Notes

• Use clean signal routing and proper tuning so the speakers, subwoofers, and amplifiers work together.
• For amplified audio systems, make sure the power wire, ground, fuse protection, and voltage support match the equipment.
• If you are building a complete DS18 setup, plan the speakers, subwoofers, amplifiers, wiring, and electrical support together before ordering.

DS18 EN4P High Density Abs 2-Way Universal Pod 1 X 4" Loudspeaker and 1 X .5-1” Tweeter(PAIR)

Audio enthusiasts are sometimes put in a position where they may not get the combination of speakers they are seeking because of the mounting limitations of their vehicle. We understand this and have developed new pods that have universal mounting options. These pods can be installed with little to no fabrication needed and will allow you to add more speakers for better and louder sound. This pod houses a 4" speaker with an added  1" tweeter. These will bolt right on to most applications to accommodate for a speakers where there were no factory options.

Note: SPEAKERS & TWEETERS ARE NOT INCLUDED

 SOLD IN PAIRS

Highlights

• 1 x 4" Speaker Mounting (DS18 PRO-X4M or PRO-X4BM Recommended)
• 1 x 0.5"-1" Tweeter Mounting (DS18 TX1 Recommended)
• Mounting Hardware and Input Cable Included
• Injected High Density ABS
• UV Protected
• 1 Set - Left & Right

Technical Details

Download EN4P Product Manual