B2 Audio Dual 12" 1000W RMS Dual 2 Ohm Vented Loaded Subwoofer Enclosure DVPE212

B2 Audio Dual 12" 1000W RMS Dual 2 Ohm Vented Loaded Subwoofer Enclosure DVPE212

Sold by AudioSellerz.com

The B2 Audio Dual 12" 1000W RMS Dual 2 Ohm Vented Loaded Subwoofer Enclosure DVPE212 is a car audio subwoofer from B2 Audio, sold by Audio Sellerz. This page keeps the supplied product details and specifications intact so you can review the actual model information before ordering. Use the product details below to confirm power, impedance, dimensions, fitment, included parts, and other specifications that apply to this exact B2 Audio model.

B2 Audio Product Details & Specifications

• Dual 12" Subwoofers: Pre-installed in a vented enclosure for powerful bass performance
• Power Handling: 1000W RMS, 2000W max power for deep, impactful bass
• Durable Design: Features bracing, acoustilux lining, and L/J-shaped slot ports for enhanced airflow and structural stability
• Heavy-Duty Construction: Built with a dual baffle, corner bracing, and wedge design to prevent flex and ensure durability
• Impedance: Dual 2 Ohm voice coils, compatible with 1-ohm or 4-ohm amplifier setups

B2 Audio Dual 12" 1000W RMS Dual 2 Ohm Vented Loaded Subwoofer Enclosure DVPE212

This listing includes:

• (1) Vented Loaded Dual 12" B2 Audio Enclosure

The B2 Audio DVPE212 isn’t just another prefab box—it’s a fully engineered enclosure designed to perform like custom work. With features usually reserved for high-end builds, this dual 12" vented enclosure comes pre-loaded with RAVE12 subwoofers and delivers massive output, tight bass response, and long-lasting durability.

Engineered Performance

• Advanced bracing & airflow design – Corner bracing, dual slot ports, and wedged construction eliminate flex and improve sound accuracy.


• Optimized port tuning – Dual 90 curved ports are tuned to 35 Hz for deeper, smoother bass response without chuffing.


• Acoustilux damping – Reduces unwanted resonance, ensuring tight, controlled low-end performance.

Built for Bass Enthusiasts

• Perfect fitment – Designed to span the width of most trunk spaces with an angled back for increased internal volume.


• Wider frequency response – Plays from 25 Hz–200 Hz, giving you both chest-pounding lows and clear midbass.


• Flexible wiring – Run at 1 ohm or 4 ohm to match your amplifier setup.

Heavy-Duty Construction

• Non-pressed coated paper cones with dual 2.5" copper voice coils for strength and heat dissipation.


• Massive motor structure – Four 80 oz magnets per woofer for serious control and excursion.


• No-flex build – Dual baffles, reinforced slot ports, and rigid bracing maximize performance under heavy power.

Specifications

• Frequency Response: 25 Hz – 200 Hz


• Sensitivity: 91 dB


• Impedance: Dual 2 Ohm


• (The subwoofers are both Dual 4-Ohm, wired in parallel down to 2-Ohm for each terminal cup)


• Tuning Frequency: 35 Hz


• Power Handling: 1000W RMS / 2000W Max


• Enclosure Volume: 3.05 cu. ft. (86.3 L)


• Port Area: 11.7 in (192 cm)


• Port Length: 6.2"


• Configuration: Dual 12" Loaded (RAVE12)


• Voice Coil: 2.5" Copper


• Magnet: (4) x 80 oz


• Gross Weight: 68 lbs (31 kg)

Dimensions:

• Length: 33"


• Height: 14.96"


• Depth: 16.53"

Already pre-loaded with B2 Audio RAVE12 subs, the DVPE212 is the ultimate solution for those who want real performance without the hassle of building a custom box. Just add power and experience bass without compromise.

Shop More B2 Audio & Related Car Audio Gear

Browse more B2 Audio products and compare car audio subwoofers. For system planning, see the subwoofer wiring and ohm-load guide and subwoofer box guide.

Follow Audio Sellerz

Stay connected with Audio Sellerz for new products, car audio builds, install videos, demos, and updates:

Follow Audio Sellerz on Facebook
Follow Audio Sellerz on Instagram
Follow Audio Sellerz on TikTok
Subscribe to Audio Sellerz on YouTube