Audio Sellerz
Audio Sellerz GroundBreaker 1.5K 10"
Audio Sellerz GroundBreaker 1.5K 10"
Couldn't load pickup availability
Audio Sellerz Ground Breaker 1.5K 10" Subwoofer
Sold by AudioSellerz.com.
The Audio Sellerz Ground Breaker 1.5K 10" is built for customers who want strong bass, tight response, and serious daily output from a more compact subwoofer setup.
Ground Breaker 1.5K is the backbone of the Audio Sellerz subwoofer family. This 10" version is a strong choice for customers who want more than a basic bass upgrade, but still need something that fits smaller spaces, truck builds, compact enclosures, or daily-driver systems where room matters.
A good 10" subwoofer can completely change the way a system feels when it is matched correctly. The Ground Breaker 1.5K 10" is built for customers who want punch, low-end support, clean output, and a serious Audio Sellerz subwoofer in a smaller footprint.
This subwoofer still needs to be built around correctly. The enclosure, amplifier, wiring, final ohm load, electrical support, and tuning all matter. A compact subwoofer can hit hard, but the full system has to support it.
Best fit for:
-
Serious daily bass systems
-
Loud daily systems
-
10" subwoofer builds
-
Truck bass setups
-
Compact enclosure builds
-
Custom trunk builds
-
Customers who want strong bass without a huge box
-
Systems built around clean amplifier power and proper electrical support
Key details:
-
10" car audio subwoofer
-
Ground Breaker 1.5K series
-
Available in D2 and D4 options
-
3" 4-layer American-made copper voice coil
-
Non-pressed pulp cone
-
High roll stitched foam surround
-
Aluminum vented former
-
Triple stack 190 oz motor
-
Center pole vent for pressure relief and coil cooling
-
Heavily vented backplate
-
Aluminum 12-spoke vented basket
-
10 gauge push terminals
-
Built for serious daily and loud daily bass systems
-
Requires proper enclosure, amplifier, wiring, and electrical support
Specs:
| Spec | Detail |
|---|---|
| Brand | Audio Sellerz |
| Series | Ground Breaker 1.5K |
| Size | 10" |
| Coil Options | D2 / D4 |
| Voice Coil | 3" 4-layer American-made copper |
| Cone | Non-pressed pulp |
| Surround | High roll stitched foam |
| Former | Aluminum vented |
| Motor | Triple stack 190 oz |
| Basket | Aluminum 12-spoke vented |
| Terminals | 10 gauge push terminals |
| Mounting Depth | 6.125" |
| Motor Width | 6.750" |
| Cutout Diameter | 9.375" |
| Outside Diameter | 10.25" |
| Motor Weight | 22 lbs |
| Best Use | Serious daily and loud daily bass systems |
Recommended enclosure:
| Box Type | Recommendation |
|---|---|
| Sealed | 1.0 cu ft |
| Ported | 2.0 – 2.5 cu ft |
| Ported Tuning | Around 33–35Hz |
Important install notes:
This subwoofer needs to be matched correctly. Before ordering, make sure the amplifier, final ohm load, enclosure, wiring, battery support, and charging system make sense for the build.
If you are not sure whether to choose D2 or D4, do not guess. The correct coil option depends on how many subwoofers you are running and what final ohm load your amplifier needs.
A single Ground Breaker 1.5K 10" can be a strong choice for customers who want a compact subwoofer with serious daily output. Dual Ground Breaker 1.5K 10" subwoofers can make a stronger bass system that needs the right enclosure space, amplifier power, wiring, fuse protection, and electrical support.
Shop more Audio Sellerz subwoofers here:
https://audiosellerz.com/collections/audio-sellerz-subwoofers
Need help with wiring and ohm load?
https://audiosellerz.com/blogs/audio-sellerz-blogs/subwoofer-wiring-diagrams-ohm-load-guide
Why buy the Ground Breaker 1.5K 10" from Audio Sellerz?
Audio Sellerz is built around real car audio. We care about the full setup: subwoofer, box, amplifier, wiring, final ohm load, electrical support, and how the system will actually be used.
The Ground Breaker 1.5K 10" is for customers who want a serious 10" bass option that can support a strong daily or loud daily system when matched correctly.
If you are unsure what amp, box, wire, or electrical support you need, reach out before ordering. We would rather help you build it right the first time than see you fight voltage drop, wrong ohm load, weak wiring, or the wrong enclosure later.