DC Audio
1.2k 1200 watt Mono Block Amplifier
1.2k 1200 watt Mono Block Amplifier
Couldn't load pickup availability
1.2k 1200 watt Mono Block Amplifier
Sold by AudioSellerz.com
The DC Audio 1.2k 1200 watt Mono Block Amplifier is a DC Audio monoblock amplifier for the subwoofer side of a car audio system. The original product information below contains the exact published output, operating voltage, impedance, controls, dimensions, and connection details that should be used when planning the installation.
A DC Audio mono amplifier should be matched to the subwoofer RMS power, voice-coil configuration, number of subwoofers, final impedance, enclosure, and vehicle electrical system. The amplifier also needs properly sized wire, correct fuse protection, secure connections, and a clean ground.
Original Product Details
DC 1.2k Amplifier
The 1.2kw competition series amplifier is a 1,200 watt rated mono block. It is capable of running up to 16 volts for up to 1500 watts. It is a linkable amp and designed to run a 1 ohm per amp or 2 ohms when strapped for up to 3000 watts from a pair.
Output Power (RMS):
- 4 ohm 350Wx1 @ 14.4 Volts
- 2 ohm 700Wx1 @ 14.4 Volts
- 1 ohm mono 1200x1 @ 14.4 Volts
- 1 ohm mono 1500x1 @ 16.0 Volts
Key Features:
- 1 ohm stable
- Variable low pass filter
- Variable subsonic filter
- Variable bass boost
- Wired Bass Knob remote control
- RCA Pass Thru
- Linkable
Full Specs:
| DC Amp Model: | 1.2k |
|---|---|
| Input Sensitivity | 6V~0.2V |
| Frequency Response | 15Hz~270Hz |
| 24dB / Octave Crossover | YES |
| Low Pass | 35Hz ~ 250Hz |
| Subsonic Filter | 10Hz-50hz |
| Remote Control | Yes |
| Signal to Noise Ratio | dB100 |
| Damping Factor | 100< |
| THD @ 4ohms | Less than 0.1% |
| Fuse Rating | External 120 amp |
| LED Status Lights | Power and Protect |
| Heatsink Length | 16.60"/419mm |
| Heatsink Width | 9.38"/238mm |
| Heatsink Height | 2.35"/59.6mm |
Match the DC Audio Amplifier to the Complete Bass Build
Compare this model with more DC Audio amplifiers and browse the complete DC Audio collection at Audio Sellerz. You can also shop DC Audio subwoofers and monoblock car audio amplifiers while planning the power and bass stages together.
Use the subwoofer wiring and final ohm-load guide before selecting voice-coil wiring, then review the amplifier gain-setting guide and car audio electrical-upgrade guide before putting a larger amplifier into service.
Confirm the Exact Product Before Ordering
Use the product title and selected variant as the starting point, then review every original specification, compatibility note, dimension, quantity, build-time notice, shipping limitation, and other condition provided above. Confirm the equipment and installation requirements before placing the order.
Follow Audio Sellerz
Stay connected with Audio Sellerz for new products, car audio builds, install videos, demos, and updates:
Follow Audio Sellerz on Facebook
Follow Audio Sellerz on Instagram
Follow Audio Sellerz on TikTok
Subscribe to Audio Sellerz on YouTube
Share
