Sky High Car Audio 4 OFC Amp Kit

Sky High Car Audio 4 OFC Amp Kit

Sold by AudioSellerz.com

The Sky High Car Audio 4 Gauge OFC Amplifier Installation Kit is a complete copper wiring kit for moderate car audio amplifier installations, daily-driver subwoofer systems, many four-channel speaker amplifiers, and customers who want a 4-gauge OFC power-and-ground path instead of CCA.

The kit includes 100% oxygen-free copper power, ground, and speaker wire together with the RCA, remote wire, ANL fuse holder, fuse, heat shrink, and ferrules needed for a cleaner single-amplifier installation. The correct application depends on the amplifier's current demand and the length of the wire run.

Four-gauge OFC can provide a strong middle ground between a compact 8-gauge kit and a larger 1/0-gauge installation. It should still be selected from actual amplifier requirements rather than an assumed wattage range.

What Is Included With the 4 Gauge OFC Amp Kit?

• 17 ft of 4 gauge OFC power wire: Main battery-to-amplifier cable.
• 3 ft of 4 gauge OFC ground wire: Included for a short amplifier ground path.
• 17 ft of 16 gauge OFC speaker wire: Included for the amplifier output connection.
• 17 ft RCA cable: Included for the source-unit-to-amplifier signal path.
• 17 ft remote wire: Included for amplifier turn-on.
• ANL fuse holder with fuse: Included for the main power-wire protection point. The original product information does not list a fuse amperage.
• Heat shrink and wire ferrules: Included for clean, secure terminations.

Who Should Consider a 4 Gauge OFC Amp Kit?

This kit may fit many moderate-power daily systems, speaker-amplifier installations, single-subwoofer systems, and upgrades where 8 gauge is too small but 1/0 gauge is not required. The amplifier manual, current draw, fuse recommendation, and cable length should make the final decision.

For a smaller copper installation, compare the Sky High Car Audio 8 Gauge OFC Amp Kit. For a larger OFC current path, compare the Sky High Car Audio 1/0 Gauge OFC Amp Kit.

Compare 4 Gauge OFC and CCA Amp Kits

Customers comparing material and budget can also view the Sky High CCA 4 Gauge E-Series Amp Kit and the Sky High 4 Gauge CCA Amplifier Installation Kit. The kits differ in material, wire lengths, speaker wire, RCA length, fuse hardware, and included accessories.

OFC does not remove the need for a good ground, correct fuse placement, protected routing, secure lugs, or proper amplifier tuning. Installation quality remains part of the electrical circuit.

Shop Sky High Car Audio Wiring and Electrical Support

Compare every current option in the Sky High Car Audio amp-kit collection or browse the wider car audio amplifier wiring-kit collection. For custom wiring, additional cable, or electrical upgrades, shop Sky High Car Audio power, ground, and speaker wire and Sky High Car Audio Big 3 upgrade kits.

An amp kit connects the amplifier to power, ground, signal, remote turn-on, and speaker wiring. A Big 3 kit upgrades important charging and grounding paths under the hood. Many stronger systems use both, but one does not replace the other.

Helpful Amplifier Wiring Guides

Use the CCA vs OFC amp-kit and wire-size guide to compare conductor materials and kit sizes. Then verify conductor and fuse planning with the car audio wire-gauge and fuse guide and follow the complete car audio amplifier wiring-diagram guide when laying out power, ground, RCA, remote, and speaker connections.

A dependable installation also needs a short, properly prepared ground and correct amplifier setup. Read the car audio amplifier grounding guide and how to set amplifier gain correctly before playing the system hard. If an amplifier shuts down or enters protection, use the amplifier protect-mode troubleshooting guide instead of replacing parts by guesswork.

Why Buy Sky High Car Audio Amp Kits From Audio Sellerz?

Audio Sellerz is a real car audio shop that works with amplifiers, subwoofers, speakers, wiring, batteries, alternators, fuse protection, and complete installation systems. Shop the full Sky High Car Audio collection at Audio Sellerz or read the complete Sky High Car Audio product guide while planning the rest of the build.

Before ordering, confirm the amplifier current demand, recommended fuse protection, cable length, wire material, ground location, speaker-wire needs, RCA routing, vehicle electrical support, and every item included with the exact kit.

Frequently Asked Questions

Is the main wire OFC?

Yes. The product information lists the 4-gauge power and ground wire as 100% oxygen-free copper.

Does this kit include a fuse?

Yes. It includes an ANL fuse holder with a fuse. The original product information does not specify the fuse amperage.

What speaker wire is included?

The kit includes 17 feet of 16-gauge OFC speaker wire.

Should I choose 4 gauge or 1/0 gauge?

Choose from the amplifier's current demand, recommended fuse protection, cable length, wire material, and future system plans. Larger is not automatically necessary, and smaller is not automatically safe.

Follow Audio Sellerz

Stay connected with Audio Sellerz for new products, car audio builds, install videos, demos, and updates:

Follow Audio Sellerz on Facebook
Follow Audio Sellerz on Instagram
Follow Audio Sellerz on TikTok
Subscribe to Audio Sellerz on YouTube