American Bass Falcon Series Speaker 6.5”

American Bass Falcon Series 6.5" Speaker 300W RMS 4 Ohm

American Bass Falcon Series 6.5" Speaker 300W RMS 4 Ohm
Sold by AudioSellerz.com.

The American Bass Falcon Series 6.5" Speaker is built for customers who want loud, clear midrange output from a compact 6.5" driver. This pro-style midrange speaker is a strong choice for aggressive door builds, front-stage upgrades, custom panels, speaker pods, and loud mids and highs systems where factory speakers cannot keep up.

Rated at 300 watts RMS and 600 watts max power at 4 ohm, the Falcon 6.5" gives American Bass customers a strong midrange option for systems that need vocals and instruments to stay loud beside serious bass. With 97dB sensitivity and a 150Hz-18,000Hz frequency response, this speaker is made for clean output, strong projection, and pro-audio style performance.

The Falcon 6.5" uses a high-grade ferrite magnet, 1.5" CCAW voice coil, paper cone, and cloth surround. This combination gives the speaker the output and response needed for front-stage mids, loud door builds, and multi-speaker setups where clarity and volume both matter.

If your subwoofers are strong but your vocals and mids are getting buried, upgrading to a proper midrange speaker can help bring the system back into balance. The American Bass Falcon 6.5" is a solid choice for customers who want their music to sound louder, clearer, and more complete.

If you are building the rest of your speaker setup, compare more car audio midrange speakers, browse the full car audio speaker collection, or match your speakers with a 4 channel car audio amplifier.

Key Features

• American Bass Falcon Series 6.5" midrange speaker
• 300 watts RMS power handling
• 600 watts max power handling
• 4 ohm impedance
• 97dB sensitivity
• 150Hz-18,000Hz frequency response
• High-grade ferrite magnet
• 1.5" CCAW voice coil
• Paper cone with cloth surround
• Strong option for front-stage mids, custom doors, and speaker pods
• Useful for loud mids and highs car audio systems

Product Specifications

• Brand: American Bass
• Model: Falcon Series 6.5"
• Speaker Type: Midrange speaker
• Speaker Size: 6.5"
• RMS Power Handling: 300 watts RMS
• Max Power Handling: 600 watts max
• Impedance: 4 ohm
• Sensitivity: 97dB
• Frequency Response: 150Hz-18,000Hz
• Magnet: High-grade ferrite magnet
• Voice Coil Size: 1.5"
• Voice Coil Wire: CCAW
• Cone: Paper cone
• Surround: Cloth surround
• Equivalent Volume Vas: 3.4 L
• Free Air Resonance Fs: 150Hz
• Mechanical Factor Qms: 6.07
• Electrical Factor Qes: 0.88
• Total Factor Qts: 0.77
• Cone Area Sd: 128 cm²
• Mechanical Mass Mms: 7.88 g
• BI Factor Bl: 5.19 Tm
• DC Resistance Re: 3.20 ohms
• Overall Diameter: 6.6" / 167.0 mm
• Front Baffle Cutout: 5.7" / 146.0 mm
• Mounting Depth: 3.4" / 87.0 mm
• Overall Depth: 3.7" / 93.0 mm
• Weight: 5.28 lb

Great For

• Front-stage speaker upgrades
• Custom door speaker builds
• 6.5" midrange speaker upgrades
• Loud vocals and mids
• Mids and highs systems
• Speaker pods and custom panels
• Rear-fill speaker upgrades
• Daily driver audio upgrades
• Demo builds and louder street systems
• Car audio systems where factory speakers cannot keep up

Built for Loud Midrange Output

The American Bass Falcon 6.5" is made for customers who want their vocals, guitars, drums, and instruments to stand out in the system. In a build with strong subwoofers, weak mids can get covered up fast. A louder and more efficient midrange speaker helps the system feel more balanced and complete.

This speaker is a good fit for custom doors, front stages, pods, and multi-speaker setups where output matters. The 6.5" size keeps it useful for many custom installs while still giving customers more performance than basic replacement speakers.

Build the Speaker System Correctly

The American Bass Falcon 6.5" should be matched with the right amplifier power, crossover settings, wiring, speaker count, and final impedance. A midrange speaker is not meant to play the same job as a subwoofer, so proper crossover protection is important.

Use clean amplifier power and avoid clipped signal. A poor tune, wrong crossover point, loose wiring, or bad mounting can make a good speaker sound harsh or fail early. A properly installed midrange speaker can make your system louder, cleaner, and more balanced.

For best results, pair this speaker with a properly matched 4 channel car audio amplifier and quality car audio speaker wire.

Installation Notes

Before ordering, check your available mounting depth, cutout size, door clearance, window clearance, grille clearance, and speaker location. This speaker lists a 5.7" front baffle cutout, 3.4" mounting depth, and 3.7" overall depth, but every vehicle, pod, door, and custom install can be different.

When installing, make sure the speaker is mounted securely and wired correctly. Keep speaker wire away from sharp metal, moving parts, window tracks, seat tracks, heat, moisture, and pinch points. A clean install helps the speaker perform better and makes the system easier to service later.

For more help planning wire size, fuse protection, and install layout, read the Audio Sellerz car audio wire gauge and fuse guide.

Helpful Speaker Setup Guides

Learn the difference between full-range, midrange, midbass, and tweeter speakers, set your system with the speaker crossover and tuning guide, and set clean power with the amp gain guide for mids and highs.

Shop American Bass at Audio Sellerz

Browse the complete American Bass car audio collection at Audio Sellerz for subwoofers, amplifiers, speakers, wiring, electrical products, and supporting equipment.

Dealers, shops, installers, builders, and resellers who want to sell American Bass and many other car audio products Audio Sellerz offers can apply for a wholesale/dealer account through AudioResellerz.com.

Follow Audio Sellerz

Stay connected with Audio Sellerz for new products, car audio builds, install videos, demos, and updates. Follow us on Facebook, Instagram, TikTok, and YouTube.