B2 Audio Dealer
B2 Audio RIOT Mono 2.5K 2500 Watt 1-Ohm Class D Subwoofer Amplifier Full Range Amplifier w/ RGB LED Illumination
B2 Audio RIOT Mono 2.5K 2500 Watt 1-Ohm Class D Subwoofer Amplifier Full Range Amplifier w/ RGB LED Illumination
Couldn't load pickup availability
B2 Audio RIOT Mono 2.5K 2500 Watt 1-Ohm Class D Subwoofer Amplifier Full Range Amplifier w/ RGB LED Illumination
Sold by AudioSellerz.com
The B2 Audio RIOT Mono 2.5K 2500 Watt 1-Ohm Class D Subwoofer Amplifier Full Range Amplifier w/ RGB LED Illumination is a car audio amplifier from B2 Audio, sold by Audio Sellerz. This page keeps the supplied product details and specifications intact so you can review the actual model information before ordering. Use the product details below to confirm power, impedance, dimensions, fitment, included parts, and other specifications that apply to this exact B2 Audio model.
B2 Audio Product Details & Specifications
- Powerful Performance: Delivers up to 1800W (or 2500W, depending on the model) of high-quality, consistent sound.
- Monoblock Design: Optimized for high-efficiency, delivering pure, focused power to a single channel.
- Compact & Versatile: Space-saving design without compromising on performance, ideal for any car audio setup.
- RGB LED Lighting: Customizable RGB LED lights for a professional and stylish installation with just a flick of a switch.
- Enhanced Efficiency: Engineered for maximum power output with minimal heat, ensuring long-lasting performance.
B2 Audio 2500W 1-Ohm Class D Monoblock Amplifier w/ RGB LED Lights RIOT Series
This Listing Includes:
- (1) B2 Audio Riot Series 2500 watts Monoblock Amplifier with RGB LED Lights
The RIOT Series Monoblock Amplifiers are built to deliver serious power, efficiency, and reliability in a compact footprint. Designed around a half-bridge Class D topology, this amplifier provides stable, consistent output while keeping heat generation and electrical strain under control—making it an excellent choice for daily-driven systems and high-output bass setups alike.
With up to 2500W RMS at 1 ohm, the RIOT 2500 balances strong low-frequency performance with dependable operation across a wide range of electrical systems. The integrated RGB LED lighting adds a clean, professional look to your install, with selectable sound-activated patterns or the option to turn lighting off completely.
For best results, we recommend upgrading your vehicle’s electrical system. A stronger charging and battery setup helps ensure maximum output, improved stability, and long-term amplifier reliability.
Why a Half-Bridge Class D Design?
The RIOT Series uses a half-bridge Class D architecture, which is well-known for its balance of efficiency, durability, and electrical friendliness.
Key advantages of a half-bridge design include:
- Improved reliability under demanding loads by reducing component stress
- Lower heat output, helping the amplifier run cooler during extended play
- Efficient power delivery, making better use of available voltage
- Better compatibility with stock and mildly upgraded electrical systems
This design allows the amplifier to deliver strong, clean bass performance while maintaining consistent operation - especially important in real-world daily-use applications.
Features
- Input: RCA Signal Input for Left & Right Channel. A minimum of 0.2V input is required for correct operation.
- Power & Protection Indicator: Power LED, Blue light shows correct operation. Protect LED, Red light shows a general malfunction, a faulty connection, or thermal protection.
- Clip Indicator: The LED will light up if the signal is clipped. An occasional flashing light is acceptable, a constantly lit diode is not.
- Flash: Enables the sound-activated LED sequences with multiple patterns and colors. The LED can be switched off by keeping the button pressed for a few seconds.
Specifications
- Continuous Output Power (RMS) @ 4 Ohm 14.4V <1% THD: 800W
- Continuous Output Power (RMS) @ 2 Ohm 14.4V <1% THD: 1400W
- Continuous Output Power (RMS) @ 1 Ohm 14.4V <1% THD: 2500W
- Circuit Configuration: HI-EF Class D
- Frequency Response: 10 Hz - 250 Hz
- Signal to Noise Ratio: >90 DB
- Input Sensitivity: 6 V - 0.2 V
- High Level Input: 10 V - 0.6 V
- Crossover Circuit: 12 DB/OCT
- Low Pass Crossover: 50 Hz - 250 Hz
- Subsonic Crossover: 10 Hz - 50 Hz
- Phase: 0-180 Degrees
- Bass Boost: 0-12 DB
- Level Control with Clip: Included
- Power Terminal Gauge: 1 Gauge
- Operational Voltage: 10 V - 16 V
- Fuse Rating: 200 A
Dimensions:
- Length: 14.57"
- Width: 4.92"
- Height: 2.24"
Shop More B2 Audio & Related Car Audio Gear
Browse more B2 Audio products and compare car audio amplifiers at Audio Sellerz. For setup help, read the Audio Sellerz amplifier gain-setting guide.
Follow Audio Sellerz
Stay connected with Audio Sellerz for new products, car audio builds, install videos, demos, and updates:
Follow Audio Sellerz on Facebook
Follow Audio Sellerz on Instagram
Follow Audio Sellerz on TikTok
Subscribe to Audio Sellerz on YouTube
Share
