American Bass Godfather 6x9 MR + Horn Speakers Pair

American Bass Godfather 6x9 MR + Horn Speakers Pair

Sold by AudioSellerz.com

The American Bass Godfather 6x9 MR + Horn Speakers Pair is built for car audio systems that need loud vocals, strong midrange output, and sharper top-end presence from a 6x9" speaker location.

This pair is a strong choice for rear deck builds, custom doors, speaker pods, demo vehicles, loud daily drivers, and mids-and-highs systems where normal replacement speakers are not enough. The 6x9" midrange design gives you more cone area than many round door speakers, while the horn helps bring more bite and projection to the upper range.

With 300 watts RMS power handling, 600 watts max power handling, 4 ohm impedance, 105dB sensitivity, and a 100Hz–20KHz frequency response, these Godfather 6x9 MR + Horn speakers are made for customers who want stronger output, cleaner vocals, and a louder speaker setup when matched with proper amplifier power and crossover settings.

Need to finish the rest of the speaker setup?
shop American Bass car audio products | shop midrange speakers | shop car audio horns | shop 4-channel amplifiers

Why Choose the American Bass Godfather 6x9 MR + Horn Pair?

The Godfather 6x9 MR + Horn pair is for customers who want more output than a basic factory-style 6x9 speaker. These are made for louder speaker builds where vocals, instruments, and upper-mid detail need to keep up with upgraded subwoofers and stronger amplifiers.

This pair makes sense for builds that need:

• Louder vocal output
• Stronger midrange presence
• A 6x9" speaker upgrade with horn output
• Better balance with upgraded subwoofers
• High sensitivity for loud mids-and-highs systems
• A speaker pair for rear decks, pods, doors, and custom panels
• More output than standard replacement speakers

Product Highlights

• American Bass Godfather Series 6x9 MR + Horn speakers
• Sold as a pair
• 300 watts RMS power handling
• 600 watts max power handling
• 4 ohm impedance
• 105dB sensitivity
• 100Hz–20KHz frequency response
• 1.5" voice coil
• 22 oz magnet
• Stamped basket
• 3.45" mounting depth
• 8.6" x 5.9" cutout size
• Good for rear decks, custom doors, speaker pods, demo vehicles, and loud daily systems

Specifications

• Brand: American Bass
• Series: Godfather
• Speaker size: 6x9"
• Speaker type: Midrange speaker with horn
• Quantity: Pair
• RMS power: 300 watts
• Max power: 600 watts
• Impedance: 4 ohm
• Sensitivity: 105dB
• Frequency response: 100Hz–20KHz
• Mounting depth: 3.45"
• Cutout size: 8.6" x 5.9"
• Magnet size: 22 oz
• Voice coil size: 1.5"
• Basket type: Stamped

Built for Loud Mids, Vocals, and Projection

Midrange speakers handle the part of the music that makes vocals, guitars, drums, and instruments stand out. If your subwoofers are loud but your music feels buried, weak, or hard to hear, upgrading the mids-and-highs section can make the whole system feel more complete.

The American Bass Godfather 6x9 MR + Horn speakers are a good option when the build needs more output from a 6x9" speaker location. They can work well in rear deck setups, custom door panels, pods, demo vehicles, and systems where louder midrange output matters.

Why the Horn Matters

The horn helps add stronger upper-range projection, which can make vocals, instruments, and detail cut through better in loud systems. This can be especially helpful when the build already has strong bass and needs the speaker section to stay loud and clear.

These speakers should still be tuned correctly. Do not treat them like subwoofers, and do not send them uncontrolled low bass. Use proper crossover settings and clean amplifier power.

Good Fit For

• Rear deck speaker upgrades
• Custom 6x9" speaker pods
• Custom door speaker builds
• Mids-and-highs systems
• Loud daily-driver systems
• Demo vehicles
• Speaker upgrades paired with subwoofers
• Systems that need stronger vocals and upper-mid output

Use the Right Amplifier

These speakers should be matched with clean amplifier power. Factory radio power is usually not the best match if the goal is loud output, better control, and cleaner performance.

Match the amplifier by RMS power, impedance, speaker count, final channel load, crossover controls, and the goal of the system. Clean power and proper tuning matter more than chasing max power numbers.

Shop matching install parts here:
shop car audio amplifiers | shop 4-channel amplifiers for speakers | shop amplifier wiring kits | shop car audio wire

Important Tuning Note

Midrange speakers with horns are not subwoofers. Do not send these speakers uncontrolled deep bass or frequencies outside the range they are designed to play. Use proper crossover settings, correct gain adjustment, and clean amplifier power to help protect the speakers and keep the system sounding right.

These speakers are listed with a 100Hz–20KHz frequency response, so the rest of the system should be planned around that range. Subwoofers should handle the low bass, midbass drivers can help with punch when needed, and these speakers can help cover strong mids and upper-range output depending on the build.

Helpful guides:
read the full range vs midrange vs midbass vs tweeter guide | read the car audio speaker tuning guide | read the amp gain setting guide

Plan the Full Speaker System

A good 6x9" midrange and horn speaker pair works best when the full system is planned together. The subwoofers, midbass drivers, midrange speakers, tweeters, horns, amplifier channels, crossover points, and speaker locations all need to make sense together.

If the build uses loud subwoofers, the speaker section needs enough power and speaker area to keep up. If the build uses multiple speakers per channel, make sure the amplifier can handle the final channel load safely.

Check Fitment Before Ordering

Before ordering, confirm that your vehicle or custom build can fit a 6x9" oval speaker with the listed depth and cutout size. Check the speaker opening, mounting depth, basket clearance, rear deck clearance, door panel clearance, pod design, wiring path, and amplifier setup before purchasing.

Some vehicles may require brackets, adapters, custom cutting, trimming, or pod work. Always measure your exact install location before ordering or cutting panels.

Frequently Asked Questions

Are these sold as a pair?

Yes. This listing is for a pair of American Bass Godfather 6x9 MR + Horn speakers.

Are these 4 ohm speakers?

Yes. These speakers are listed as 4 ohm.

How much power do they handle?

These speakers are listed at 300 watts RMS and 600 watts max.

Are these midrange speakers?

Yes. These are 6x9" midrange speakers with horns designed for vocals, instruments, projection, and strong mids-and-highs output.

Can I run these from a factory radio?

A properly matched amplifier is recommended if you want stronger output, better control, and better performance.

Can these be used in rear decks?

Yes. They can be a good choice for rear deck speaker upgrades when the vehicle has proper 6x9" fitment, depth, clearance, wiring, and mounting support.

Do I need a crossover?

Yes. Use proper crossover settings to keep the speakers playing the frequency range they are designed for and to help prevent damage from low frequencies or poor tuning.

Why Buy American Bass From Audio Sellerz?

Audio Sellerz is a real car audio shop that works with daily builds, custom doors, speaker pods, demo vehicles, subwoofer systems, mids-and-highs setups, wiring, electrical upgrades, and complete system planning.

If you are not sure if the American Bass Godfather 6x9 MR + Horn speakers are the right match for your build, message us through the live chat bubble on AudioSellerz.com and we can help you match speakers, amplifiers, wiring, and crossover needs.

Want more help planning the full system?
read how to pick the right car audio system

Follow Audio Sellerz

Follow Audio Sellerz for car audio products, installs, demos, speaker upgrades, wiring tips, and new product updates:
Facebook | Instagram | TikTok | YouTube