DS18
PRO-X 12" Mid-Bass Loudspeaker | 500W RMS 8-Ohm
PRO-X 12" Mid-Bass Loudspeaker | 500W RMS 8-Ohm
Couldn't load pickup availability
PRO-X 12" Mid-Bass Loudspeaker | 500W RMS 8-Ohm
Sold by AudioSellerz.com
The DS18 PRO-X12MBASS is a 12" mid-bass loudspeaker from the DS18 PRO line rated at 500W RMS with an 8 ohm design. Coaxials and loudspeakers like this are where most systems start, because the speakers decide how clear the whole build sounds.
DS18 Product Details
DS18 PRO-X12MBASS 12" Mid-Bass Loudspeaker 1000 Watts 8-Ohm
If you are needing a pro audio speaker that absolutely slays the mid-bass range then the look no further than the PRO-X12MBASS mid-bass speaker. This massive 12 not only looks amazing but powers out thumping mid-bass notes at demand. This mid-bass speaker is an amazing addition to any pro audio system that needs the mid notes played with authority.
Highlights
- Massive 12 inch design will bring out maximum punchy mid-bass.
- Large 2.5" voice coil that handles 500w RMS and 1000w peak power for sharp mid-bass.
- A 40hz-5khz frequency range gives multiple tuning options for this huge mid-bass speaker to fit your systems needs.
- With a 96db sensitivity rating, you don't need huge amounts of power to get this mid-bass speaker to its optimum potential.
Technical Details
| Nominal Diameter | 12" |
| Nominal Impedance | 8 ohms |
| RMS Power Handling | 500W |
| MAX Power Handling | 1000W |
| Sensitivity (1w/1m) | 96dB |
| Frequency Response | 40Hz-5KHz |
| Recommended Hi Pass Crossover | 60 Hz |
| Pair or Single | Single |
| Grill Included | No |
| MOTOR | |
| Voice Coil Diameter | 2.5 |
| Voice Coil Former Material | KSV |
| Winding Material | SV |
| Cone Material | Paper |
| Dustcap Material | Paper |
| Surround Material | Cloth |
| Basket Material | Steel |
| Basket Color/Finish | Glossy Red |
| Magnet Material | Ferrite |
| Magnet Weight | 65oz |
| Displacement Volume | 0.55L |
| MEASUREMENTS | |
| Overall Diameter | 12.12 |
| Overall Depth | 5.19 |
| Front Mount Baffle Cutout | 10.9 |
| Mounting Depth | 4.88 |
| Motor Diameter | 6.69" |
Setup Tips From Audio Sellerz
- Power it with an amplifier channel rated close to its 500W RMS at 8 ohms, then set the gain carefully instead of turning it all the way up.
- Use a high-pass filter so deep bass goes to the subwoofer. The speakers will play louder and cleaner without it.
- Pro audio mids work best with a proper crossover or DSP so each driver only plays the range it was built for.
Related DS18 Products
More DS18 gear that pairs well with it or is worth comparing:
- DS18 PRO 12" Mid-Bass Loudspeaker 1250 Watts Rms 8-Ohm
- DS18 PANCADÃO Mid-Bass Loudspeaker 12" 1500 Watts Rms 8-Ohm
- DS18 PANCADÃO Mid-Bass Loudspeaker 12" 3000 Watts Rms 8-Ohm
- DS18 PRO 12" Neodymium Mid-Bass Loudspeaker 1000 Watts Rms 8-Ohm
Helpful Audio Sellerz Links
Shop more 12" car speakers or browse the full DS18 collection.
For setup help, read full range vs mid range vs mid bass vs tweeters and car audio speaker tuning guide.
Follow Audio Sellerz
Stay connected with Audio Sellerz for car audio builds, product updates, installation tips, videos, giveaways, and new releases.
Follow Audio Sellerz on Facebook, Instagram, TikTok, and YouTube.
Share
