DS18
Polaris Slingshot Rear Subwoofer Enclosure Loaded | NXL-10SUB/BK and RGB LED Lights | Fits Either Passenger or Driver Side | 2015 - Current
Polaris Slingshot Rear Subwoofer Enclosure Loaded | NXL-10SUB/BK and RGB LED Lights | Fits Either Passenger or Driver Side | 2015 - Current
Couldn't load pickup availability
DS18 SLG-RSUB10LD Polaris Slingshot Rear 1 X 10" Subwoofer Enclosure
With NXL-10SUB/BK
Feel the bass in your Polaris Slingshot with DS18’s SLG-RSUB10LD: a subwoofer enclosure installed in the Rear Storage Compartment behind Polaris Slingshot seats!
Adding this durable 10” Subwoofer Enclosure into your Polaris Slingshot’s sound system will instantly increase the quality and feel of the bass response it reproduces.
Fitted perfectly for rear storage compartments in all Polaris Slingshot models, when combined with all enclosures in our SLG series, the SLG-RSUB10LD reinforces an impenetrable soundstage designed to cut through the noise of the open road!
The high powered NXL-10SUB was built to bring the bass on your Slingshot to life. Designed with an IP65 marine-grade frame, this 10-inch subwoofer is guaranteed to deliver hard-hitting bass that will stand up to the elements. Plus, its UV compliant cone and butyl rubber surround make it stable enough to withstand the open air design of the Slingshot. Not only does the NXL-10SUB bring the BOOM with its 300 watts RMS and 600 watts max power handling and 4-Ohm impedance, it also features integrated RGB lights that can be connected to any RGB 4-wire circuit for a customizable ambiance that will match your mood or color scheme.
(LED-BTC recommended)
Install this subwoofer enclosure into your Polaris Slingshot’s sound system seamlessly through use of the factory bolts and mounting location.
Upgrade your sound system today with DS18’s SLG-RSUB10LD and experience the ultimate in subwoofer performance.
Highlights
- Durable PE (Polyethylene) waterproof enclosure with UV Protection
- Easy to install – all hardware and wiring included
- OFC tinned 12GA wiring for more power handling and durability
- Fits Slingshot Models From 2015 or Later
- Works on both driver and/or passenger side storage compartments
- Coated metal bracket for better resistance to the elements
- 75ft3 Ported/Vented Enclosure Type
- Damping material for better subwoofer performance
Great For
- Polaris Slingshot Models 2015+
Technical Details
| GENERAL | |
| Speaker Size | 10" / 254mm |
| Total Impedance | 4 Ohms |
| Total RMS Power Handling | 300W |
| Total MAX Power Handling | 600W |
| Sensitivity (1w/1m) | 89dB |
| Frequency Response | 35-250Hz |
| Recommended Lo Pass Crossover | 100Hz |
| SPEAKER SPECIFICATIONS | |
| Voice Coil Diameter | 2" / 50.8mm |
| Voice Coil Former Material | Glass fiber |
| Winding Material | CCAW |
| Cone Material | Injection Molded Polypropylene + UV Compliant |
| Dust Cap Material | PPI |
| Surround Material | Butyl (Rubber) |
| Basket Material | High Temp Injection Molded Composite (ASA) with UV Protection coating |
| Magnet Material | Ferrite |
| Magnet Weight | 72oz |
| BOX SPECIFICATIONS | |
| Internal Volume | 0.75 ft3 / 21L |
| Load Configuration | Single |
| Box Type | Ported / Vented |
| Port Tuned (Fb) | 40Hz |
| Box Material | Polyethylene (PE) |
| Finish Material | Black |
| -3Db Dropping Point (F3) | 45Hz |
| UV Protection | Yes |
| Waterproof Rating | IP65 |
| MEASUREMENT | |
| Overall Height | 18.78" / 477mm |
| Overall Width | 15.25" / 388mm |
| Overall Depth | 14.31" / 363.3mm |
