Bavsound Ghost Underseat Subwoofers for BMW, V3, 2 Ohm, Pair [REQUIRES HEAT GUN & DRILL]

Bavsound Ghost Underseat Subwoofers for BMW, V3, 2 Ohm, Pair [REQUIRES HEAT GUN & DRILL]

Sold by AudioSellerz.com

The Bavsound Ghost Underseat Subwoofers for BMW, V3, 2 Ohm, Pair [REQUIRES HEAT GUN & DRILL] is a BAVSound Ghost vehicle-specific bass upgrade for BMW, V3, 2 Ohm, Pair [REQUIRES HEAT GUN & DRILL]. It replaces the compatible factory woofer locations so the vehicle can gain stronger sub-bass and midbass output without sacrificing trunk or cargo space to a conventional subwoofer enclosure.

Heat Gun & Drill Required: BAVSound specifically marks this application as requiring a heat gun and drill. Do not order it expecting the same completely bolt-in procedure as other Ghost versions.

Higher Efficiency from the Factory Amplifier

BAVSound designed the Ghost woofer around efficiency. A more efficient woofer converts more of the amplifier's available power into acoustic output, which is especially important when the system is staying on the original factory amplifier.

For the standard Ghost V2/V3 applications, BAVSound claims approximately 10 dB+ more output from 20 Hz to 60 Hz than the compatible factory woofer. BAVSound describes that as roughly twice the perceived loudness in the critical sub-bass range and more than eight times the acoustic energy. These are manufacturer performance claims from the supplied product information.

40-200 Hz Sub-Bass & Midbass Performance

The underseat woofer in these vehicles is not only responsible for the deepest bass. It also plays important midbass information such as kick drums, upper bass-guitar notes, and the transition between the door speakers and the lowest frequencies.

BAVSound states that the Ghost design maintains a nearly flat response through approximately 40 Hz to 200 Hz within ±3 dB. That wider operating range is important because a woofer that only plays deep sub-bass can leave a hole in the midbass region.

Oversized Neodymium Magnet & Lightweight Poly Cone

The supplied BAVSound specifications identify an oversized neodymium magnet and a lightweight poly cone as core parts of the Ghost design. The motor is intended to provide strong control and output from the available amplifier power, while the lightweight cone helps the driver respond quickly enough to reproduce both low bass and punchier midbass information.

Factory-Matched Impedance

BMW-family factory audio systems can use different woofer impedances depending on the chassis and audio package. BAVSound produces different Ghost versions to match those factory loads. Matching the correct 2-ohm, 4-ohm, or 8-ohm version is important because impedance affects amplifier load, power delivery, and system performance.

160W RMS / 320W Peak Power Handling Per Woofer

Although Ghost woofers are designed to make efficient use of the factory amplifier, BAVSound also rates the standard Ghost woofer at 160 watts RMS and 320 watts peak per woofer. This gives the driver additional power-handling capability, but any amplifier change should stay within the manufacturer's requirements and warranty terms.

Product Specifications & Configuration

• Application: BMW, V3, 2 Ohm, Pair [REQUIRES HEAT GUN & DRILL]
• Ghost Version: V3
• Impedance: 2 Ohm
• Power Handling: 160W RMS / 320W peak per woofer, per BAVSound supplied specifications
• Manufacturer Output Claim: 10 dB+ louder from 20-60 Hz than the compatible factory woofer
• Manufacturer Response Claim: approximately 40-200 Hz within ±3 dB through the key sub/midbass range
• Motor: Oversized neodymium magnet design
• Cone: Lightweight poly cone

Factory-Location Installation

BAVSound designed the standard Ghost applications around the factory woofer mounting locations and factory-style plug. The supplied information describes many installations as taking less than 90 minutes with basic tools. Typical underseat installation involves accessing the front-seat area, removing the woofer covers, removing the original drivers, and installing the Ghost replacements.

Because the Ghost upgrade stays in the original location, it does not consume normal trunk or cargo space. Follow any special-tool or enclosure-modification notice shown above because those notes override the normal plug-and-play expectation.

Confirm Vehicle, Factory Audio Package, Version & Impedance

Ghost products are application-specific. Before ordering, match the exact vehicle generation, factory audio system, Ghost version, impedance, and any installation warning in this product title to your vehicle. Two visually similar BMW or MINI models can require different Ghost woofers depending on the original audio system.

Shop BAVSound & Bass Upgrade Resources

Browse more BAVSound vehicle-specific audio upgrades from Audio Sellerz, compare our broader car audio subwoofer selection, and read the complete car audio bass setup guide for help planning a larger system. For more on impedance and electrical loading, use our subwoofer wiring and ohm-load guide.

Manufacturer Warranty Note

The supplied BAVSound information states that warranty coverage is not valid when these woofers are used with aftermarket amplifiers or custom audio systems. Warranty coverage is subject to BAVSound's applicable manufacturer terms.

Follow Audio Sellerz

Stay connected with Audio Sellerz for new products, car audio builds, install videos, demos, and updates:

Follow Audio Sellerz on Facebook
Follow Audio Sellerz on Instagram
Follow Audio Sellerz on TikTok
Subscribe to Audio Sellerz on YouTube